User manual

Filters
Slider
Dry Signal
Mixes the original signal with the copied signal, indicating the in-
tensity of the original signal.
The following setting options are available in the Chorus area:
Button
Mono/Stereo
Gives the processed part of the audio file a more "mono-like" or
"stereo-like" sound respectively.
6.2.2 Convolution Reverb Effect
The Convolution Reverb effect transfers the convolution reverb conditions of a reference
file and adjusts the audio file to the relevant reverb conditions.
The following setting options are available:
Button
Select Impulse
Response
Opens the source file for the impulse response from which the
reverb effect for the audio file to be edited is generated.
Graph
Impulse Response
Gain
Displays the signal of the impulse response.
Graph
Gain
Displays the frequency limit for the reverb. The y-axis of the
curve specifies the gain of the reverb effect in the diagram, while
the x-axis shows the frequency.
Switches between a linear and logarithmic scale for the limiting
frequency graphic.
Slider
Pre-Delay
Specifies the length of time required by the sound to be deflected
from an obstacle, thereby indicating the intensity of the echo.
Slider
Dry Signal
Mixes the original signal with the copied signal, indicating the in-
tensity of the original signal.
Slider
Effect
Mixes the original signal with the copied signal, indicating the in-
tensity of the copied signal.
6.2.3 Delay Effect
The Delay effect creates an echo using a copy of the original signal which is played back
with a delay.
The following setting options are available in the Delay area:
Slider
Delay Time
Specifies the delay in playing back the copied signal.
Slider
Feedback
Specifies how many copies of the original signal are to be made.
Nero WaveEditor 30