User manual

Audio files
Nero WaveEditor 23
5.4.6 Test Tone Generator Window
The Test Tone Generator window allows you to insert a test signal in the audio file.
The General Settings area of the Test Tone Generator window offers you the following
setting options:
Input field
Duration
Specifies the duration of the test signal in seconds.
Slider
Amplitude
Specifies the amplitude of the test signal both for sound and noise.
Option button
Tones
Defines that the test signal is reproduced as a tone. Also activates
the area containing the setting options for the wave form, start fre-
quency and end frequency of the test signal.
Drop-down menu
Wave form
Specifies the wave form that the test signal should have.
Input field
Start frequency
Specifies the start frequency of the test signal.
Input field
End frequency
Specifies the end frequency of the test signal.
Option button
Noise
Defines that the test signal is reproduced as a noise. Also activates
the area that defines the type of noise.
Drop-down menu
Color
Specifies the type of noise. White is a loud noise, Pink a medium
noise and Brown a quiet noise.
5.4.7 Insert a Test Signal in an Audio File
To insert a test signal into an audio file, proceed as follows:
1. Click the Edit > Insert Test Signal menu.
 The Test Signal Generator window appears.
2. Make the required settings for the test signal to be inserted.
3. OK button. Click the
4. Now define the range of the test signal by moving the arrows at the bottom of the file display.
5. To fade out an audio file before the test signal, move the blue-green arrows at the start of the
e-green ar
rows at the end of the
ht.
 You have inserted a test signal in the audio file.
test signal at the top of the file display fro
m left to right.
6. To fade in an audio file after the test signal, move the blu
test signal at the top of the file display from left to rig