User Guide

Quickstart - Wave Editor Audio files •
••
• 21
2. In the 'Volume' menu, select the 'Change Volume' command. Push the slider
in the direction required (pushing it upward will lead to a higher maximum
level; pushing it down will result in a lower maximum level) then click on the
'OK' button.
The altered volume is shown in the section selected.
5.6.3 Changing volume
This section describes how to alter the volume of a selected section, for
example because it is too quiet.
1. Open an audio file and highlight the section you want.
2. In the 'Volume' menu, select the 'Normalize' command. Push the slider in the
direction required (if you push it upward it will increase the volume; pushing
downward will reduce the volume) then click on the 'OK' button.