User manual

Nero Wave Editor Enhancement • 48
4. Check the box in the 'User drawn filter response' area if you want to use your
own frequency. You can draw this using the green line.
Clicking on the
button plays the audio file with the specified changes. This
allows you to check immediately whether you are happy with the results.
5. Click on the 'OK' button to accept the changes.
8.5 Declicker
The Declicker effectively removes the clicks which are often heard on records.
The Decrackler is aimed at very short, impulse-type interference with small
amplitudes which occurs frequently (and sounds like crackling).
1. Choose 'Declicker' from the 'Enhancement' menu.
2. Check the box in the 'Declicker' area if you want to remove clicks. Specify the
sensitivity of the Declicker by turning the corresponding knobs to set the
detection threshold and the maximum length of the clicks. If you check the
'High Quality' box, a complex algorithm is used for interpolation. If your PC is
not fast enough for high quality mode, you should uncheck this box.
3. Check the box in the 'Decrackle' area if you want to remove crackling.
Specify the sensitivity of the Decrackler by turning the corresponding knobs
to set the detection threshold and the crackle reduction level.
Clicking on the
button plays the audio file with the specified changes. This
allows you to check immediately whether you are happy with the results.
4. Click on the 'OK' button to accept the changes.