Operation Manual

Burn Options
Nero Video
140
Recording Settings
Displays a dialog box. You can change the desired Settings for
recording here.
The following setting options are available in the dialog box of the Recording Settings:
Drop-down menu
Speed
Allows you to choose the burning speed.
Only available when burning to a disc burner.
Check box
Determine maximum speed
Before burning, the program verifies whether the disc burner
is capable of burning the session with the selected write
speed.
Check box
Write
If this check box is selected, Nero Video carries out burning
immediately after a speed test.
When writing to an image file, this check box is
automatically enabled.
Drop-down menu
Book Type setting
Defines the book type. The Automatic option is selected by
default.
The drop-down menu is only displayed for supported disc
burners.
The following entries are available in the Book Type setting drop-down menu:
Automatic
Automatically defines the most compatible book type for this
disc.
DVD-ROM
Sets the book type to DVD-ROM.
Physical disc type
Leaves the book type unchanged as specified on the DVD
disc.
Current recorder setting
Applies the book type setting from the disc burner.
See also
 Burning a Disc →140
 Burning an Image File →142
 Writing to Hard Drive Folders →143
9.2 Burning a Disc
The following requirement must be fulfilled:
▲ The Burn Options screen is displayed.
To burn a project to a disc, proceed as follows: