User manual

Nero Recode Manual

from the other field. This is very fast, but image details in the vertical axis may

be removed.

Interpolate Adaptive: Similar to Interpolate, but discards only sections

which are not needed. Therefore, it is not as fast as Interpolate, but gives

better detail result.

Motion Adaptive: The amount of image motion and the motion direction is

taken into consideration for the interpolation.

The selected deinterlace method will be only applied if deinterlacing of the

source video is possible! If you choose Automatic, Nero Recode takes the

method that fits best.

Button

Encoder

Settings

Opens a window with enhanced encoder settings for the selected codec

(see Encoder Settings Window).

Only active if encoder settings are available.

6.2. Edit Video Encoder Settings

In the Encoder Settings window you can change settings for a specific codec. The window

is opened by choosing a codec in the Edit Profile window and clicking the Encoder

Settings button. We recommend to only change these settings if you have experienced

knowledge in this area!

Note that only those settings and values are shown that are possible and applicable for

the selected codec!

6.2.1. General Settings Tab

On the General Settings tab in the Encoder Settings window you can change the

general encoding settings.

With the settings in the Psychovisual enhancements area, you can use human

perception patterns to achieve better overall quality.

This means, for example, that the quality is better in the middle of the picture than at the

outer edges because the eyes tend to focus on the middle and do not notice slight blurring

at the edge. Because quality is "saved" at the edge, you can either improve overall quality

or achieve greater compression. This means that you can achieve greater compression

without any appreciable loss of quality.