User manual

Edit Profile Window

Nero Recode

7 Edit Profile Window

The Edit Profile window displays the profile settings for the selected profile. These settings

affect the encoding and are pre-defined and optimized for a specific output format. However,

you can change the profile settings to meet advanced needs.

Note that settings which are not possible for the selected profile are not shown.

Changes will only be used for this job when you click the OK button, as predefined profiles

will not be changed permanently. If you want to save your changes permanently, you have to

create a new profile using the Save as button. The new profile will then be selectable in the

Profile drop-down menu for further encoding.

The Edit Profile window can be opened via the Edit Profile button on the right side in the

Recode screen.

The following buttons are available in general:

Reset

Resets all settings to the default original settings.

Save as

Saves the changes you have made to the predefined profile under a

new name. The window Save new profile is opened in which you

can select the respective device and enter a profile name..

Save

Saves the changes you have made.

Only available if a custom profile has been changed. Predefined

profiles cannot be changed permanently

Applies changed settings and closes the window. Changes are

applied only once for predefined profiles.

Cancel

Cancels the procedure and closes the window.