User manual

Recoding DVD-Video
Nero Recode
29
4.4.2 Quality Settings
The following setting options refer to the Quality:
Drop-down menu
entry / Field
Fit to target
Recodes the content of the imported disc automatically in such a
way that the output size fits the target size that you select or enter
here.
This is done by reducing or increasing the quality of the video (video
bit rate) automatically. If the selected target size is the same size as
the source, a 1:1 copy is made. If you have removed video content in
the Mode screen, then Nero Recode increases the quality of the
output video (video bit rate) automatically to fit to the selected target
size.
You can define the target size in the editable drop-down menu:
4403 (DVD5): Content fits onto a DVD5 with 4.7 GB (4403 MB)
8089 (DVD9): Content fits onto a DVD9 with 8.5 GB (8089 MB)
You can also enter a custom value in MB for the target size in the
editable drop-down menu.
Note that it is not in every case possible to achieve the target size as
the video cannot compressed any more and you have to deselect
titles, audio or subtitles to achieve your wished target size.
If the desired target size is too large to be burned on a DVD, we
recommend that you save the resulting DVD structure to hard drive
(Target drop-down menu > Save to hard drive) and play it from the
hard drive with Nero Kwik Media, for example
Drop-down menu
entry
Custom
Allows you to manually adjust the video quality.
Drop-down menu
entries
Very good / Good /
Moderate / Low
Chooses the
quality factor . The quality factor is also indicated by the
quality slider in the Advanced quality settings area.
Not available for the DVD profile.