User manual

Nero Recode wizards
Seite 12
5.1.1 DVD tab
This tab is used to define the settings for importing DVDs.
The following input options are available:
Prompt to include
DVD data files
when importing
check box
This decides whether this content is included in copying when
importing a DVD with data content. This box must be checked
if the data content is also to be copied.
Relax DVD-Video
specification to
allow 16-bit
Unicode for the
volume label
check box
This relaxes the restrictions on the use of character sets. Nero
Recode does not use characters from languages like Japanese
or Korean, which have a 16-bit Unicode character set-that does
not comply with DVD video requirements.
Remove P-UOPs
(Prohibited User
Operations) from
target disc
check box
This decides whether the prohibited areas on a DVD are to be
made available to the user while copying. For example, if the
original DVD contains an area that cannot be skipped, you can
use Nero Recode to remove the block, so that users can skip or
fast forward through the area.
Remove Layer
Break
check box
This removes the layer interrupt. If the original DVD consists of
two layers, there is a command on the DVD to freeze the
image briefly to allow the laser to switch from the first layer to
the second. When Nero Recode is used to copy to a DVD with
just one layer, this command is redundant and can be
removed.
5.1.2 Nero Digital tab
This tab is used to define the settings for conversion to Nero Digital format.
Once Nero Recode has created an MPEG-4 file, a check is automatically made to see
whether the video quality of would improve by converting the file a second time. The
selection menu is used to define how Nero Recode should proceed in this case.
The following selection options are available:
Ask me to confirm
which files need a
second pass.
If a second conversion would improve the quality, a dialog box
opens before the second conversion takes place. This can be
used to define whether or not the second step is to take place.
Do not ask me.
Always do a
second pass for
those files which
need it.
If a second conversion would improve the quality, this is carried
out automatically without checking.
Do not ask me.
Never do a second
pass.
A second conversion never takes place, not even if this would
improve the quality of the resulting MPEG-4-file..