User Guide

Quickstart NeroNET Nero (Client) • 51
2. Click on NeroNET, to set up the NeroNET server at the client. The existing
accounts appear in the dialog that opens.
3. Click on Create to set up the account for the NeroNET server.
4. In the 'User name' field, enter the user name which that you received from the
administrator of the NeroNET server and enter the password in the
appropriate field. As a default, the first account is given the name
'NeroNET_account 1'. The account number is increased by one for each
additional account. You can also change the name of the account.
The 'Auto-detected server' area contains all NeroNET servers found in the
network including their IP addresses, as well as the site and the designation of
the server (if entered).
The 'Port' field shows the number of the port on which the server is running.
With automatically recognized servers, the port number is automatically
recognized.
Nero has an 'Auto Detection' function. As a result, all the active NeroNET
servers in the same IP network will be found automatically. Servers in other IP-
networks must be entered by hand.