3

Burn Compilation
Check box
Verify written data
Checks the data written to the disc after the burn process.
You can use this option particularly when burning backups to
ensure that all data has been written correctly.
This check box is only available if the selected recorder is not
the Nero Image Recorder.
The speed test and simulation are not required for recorders that have a func-
tion for protecting against buffer underruns.
10.4 Start the Burn Process - Burning Discs with the Drive
Many CD players cannot read rewritable CDs (CD-RW). You should therefore
use normal CD-ROMs for burning Audio CDs.
To start the burn process, proceed as follows:
1. Click the Burn button in the main screen.
 The Burn Compilation window appears; the Burn tab is in front.
2. Check or select the options on the individual tabs.
3. Insert an appropriate blank disc and click the Burn button.
 The burn process is started. On the screen a progress bar indicates the progress being
made by the burn process.
4. If you want to shut down the PC when done (as long as this is technically feasible), enable
rify w
ritten data option.
e to start another burn process with the same compilation, click the Burn
g process is complete. You can now remove the burned disc from the re-
cord
er.
10.5 Burn ting an Image File
, proceed as follows:
2. Create a new compilation of your choice.
the Shut Dow
n PC after Completion of Burn check box.
5. If you want to check the written data after burning, enable the Ve
 When the burn process has finished, a dialog box appears.
6. If you would like to display the extended area with the event log, click the Details button.
7. If you would lik
Again button.
8. Click the OK button.
 The burnin
ing with Image Recorder – Crea
To create an image file
1. Click the New button.
Nero Linux 34