User Guide

InCD About InCD • 6
You can also find out more about Mount Rainier at http://www.mt-rainier.org
.
1.2.3.1 Remappers
In order to be able to read CDs written with Mt. Rainier drives on drives that do
not support this format (CD-MRW), a so-called 'remapper' is needed. This is
installed automatically during the installation of InCD. The 'remapper' has to be
appropriately installed later on other PCs. Depending on the operating system
used, InCD has to be additionally installed.
Details are provided in the following table:
Windows 98
Windows Me
Windows 2000
Windows XP
CD-MRWs need the 'remapper' in order to be rendered
legible. The remapper can also be downloaded from
http://www.nero.com
.
Windows 95
Windows NT
CD-MRWs cannot be read with the 'remapper' alone. With
these versions of Windows, the InCD program has to be
installed as well.
1.2.4 UDF Reader
A UDF read driver is required so that a disk formatted using InCD can also be
read on a PC on which the program is not installed. This driver can be
downloaded free of charge from the Ahead Software AG website
www.nero.com
.
InCD must be installed on a system in order to read a DVD-RW or DVD+RW
(if not finalized) medium.
The current version of the UDF reader is not supported by Windows NT4.
InCD has to be installed instead.
1.3 Update
InCD can only be upgraded to its current version if a registered version of InCD
1.6x (or later) or Nero is installed.
1.3.1 Tips for the InCD 1.3 user
InCD does not support the format used by InCD 1.3. In other words CD-RWs
which have been formatted with InCD 1.3 cannot be used with InCD 2.x (or any
later version).
1. Copy all the data which you have stored with InCD 1.3 onto a hard disk.
2. Uninstall InCD 1.3.
3. Install InCD 2.x. or any later version. (see section 2, 'Installation').