User Guide

InCD Working with InCD • 32
When you click on the Properties button, the appropriate command will be
executed; both related register cards will be opened. The 'Format Disk to CD-
MRW' check box is located on the 'InCD Page Settings' register card. This
check box is automatically activated with drives that support writing in CD-MRW
format. Please check this setting if you are not sure whether this is the case o
r
not.
Please check whether the 'Auto Insert Notification' option has been activated fo
r
your recorder, as otherwise a new medium will not be immediately recognized
following insertion.
In this case, leave the program wizard, wait until the recorder has ceased
accessing the drive, and then repeat steps 2 to 4.
5. The window that appears will provide information on the status of the
medium. If the medium has already been formatted, you can decide how it
should be reformatted. Activate the option of your choice, then click on the
Finish button.
Complete Format: The medium is first physically, then logically
formatted. While this process is taking place, all
the data stored on the medium will be erased.
Normal Format:
The medium is only logically formatted. This
means that only the information on the data, stored
on the disk, is erased and not the data itself.
Because the data can be restored by experts, this
formatting method is not suitable, e.g. in cases
where confidential data is stored on the medium.
Skip sector search to
reduce processing time:
This check box cannot be deactivated with CD-
MRW media.