User manual

General information
1 General information
1.1 About the manual
In order to make best use of this manual, please note the following conventions:
Symbol Meaning
Indicates warnings, preconditions or instructions that have to be
followed strictly.
Indicates additional information or advice.
1. Start …
A number at the beginning of a line indicates a request for action.
Carry out these actions in the order specified.
Indicates an intermediate result.
Indicates a result.
OK
Indicates text passages or buttons that appear in the program
interface. They are shown in bold face.
Chapter
Indicates references to other chapters. They are executed as
links and are shown in red and underlined.
[…] Indicates keyboard shortcuts for entering commands.
1.2 About InCD Reader
With InCD Reader, all discs that were created with InCD can be read, even on computers
that do not have InCD installed. InCD Reader also assumes the function of the so-called
Remapper. The Remapper is necessary if you wish to read MRW-Disks (Mt. - Rainer-Disks)
in hard drives that do not support the MRW disc format.
In addition, InCD Reader provides read access to all discs that were created with SecurDisc
– even on drives without SecurDisc support.
Page 4