User manual

Working with Nero ImageDrive
Page 7
4 Working with Nero ImageDrive
4.1 Program interface
The Nero ImageDrive program interface is the starting point for enabling Nero ImageDrive,
configuring up to two virtual drives, and mounting image files.
Nero ImageDrive has up to three tabs: the Options tab is always available, while the First
drive and Second drive tabs are only displayed when the corresponding drives are
enabled.
Fig. 2: Options tab
The following input options are available:
Enable/
Disable
Enables/disables Nero ImageDrive (see
Enabling Nero
ImageDrive
).
OK
Applies any changes and closes Nero ImageDrive.
Options tab
Enable
first/second
drive
Enables the first/second virtual drive (see
Enabling drives).
Mount images
at startup
Mounts image files automatically at startup.
First and Second drive tabs
Image
Displays the file name of the currently or most recently mounted
image.
…
Displays the Open Image window where you can select an image
file.
Show Image
Info
Opens the Information window which provides information about
the mounted image file, such as the name, date, and size.
Eject
Disables the image (corresponds to ejecting a disc). Once the
image is disabled, the Load button is displayed.
Load
Mounts the image that is displayed in the Image display panel.
Once the image is mounted, the Eject button is displayed.