User manual

Enabling drives
Page 10
6 Enabling drives
After you have enabled Nero ImageDrive, you can use it to configure up to two virtual drives.
To do so, proceed as follows:
1. Launch Nero ImageDrive (see Launching the Program).
2. To enable the first drive, check the First drive > Enable drive box.
Æ The virtual drive is enabled and the first available drive letter is assigned to it. The drive
letter is displayed in parentheses after First drive. The First drive tab is generated.
3. To enable the second drive, check the Second drive > Enable drive box.
Æ The virtual drive is enabled and the first available drive letter is assigned to it. The drive
letter is displayed in parentheses after Second drive. The Second drive tab is
generated.
Fig. 5: Nero ImageDrive with two enabled drives
Î You have enabled the drives. The virtual drives are now available on your computer and
are displayed in Microsoft Windows Explorer™.