User manual

LightScribe
The interface in the Disc Label screen works on the same principle as Nero
CoverDesigner. Basically, it is irrelevant whether you print a label on paper or directly onto
an appropriate disc.
Please see the separate Nero CoverDesigner user manual for full instructions on how to
make professional looking covers and labels.
4. Click on the Next button.
Æ The Final Burn Settings screen is displayed.
5. Repeat steps 2 to 6 under Burning discs with the drive.
Æ The Burning Process screen is displayed and the burn process starts. You can monitor
the process status in the status bar. As soon as the burn process is finished, the
CD/DVD is ejected and a dialog box is opened.
6. Turn the blank LightScribe disc around, i.e. insert it in the LightScribe recorder with the label
side facing down.
Æ The LightScribe Print Properties window opens and the print process starts. You can
monitor the process status in the status bar. As soon as printing is finished, the Nero –
LightScribe dialog window opens and displays a message about the result of the print
process.
7. Click on the OK button.
If you wo
8. uld like to print or save a log of the burn process, click on either the Print or Save
9.
Î
nother option from the final screen
or by exiting Nero Express (see Final screen
button.
Click on the Next button.
You have successfully created and printed a LightScribe label as an integral part of your
CD/DVD project and can now continue by selecting a
).
Nero Express 49