User manual

Benchmark Tab - Standard Tests
Nero DiscSpeed
13
 The test is run. You can follow the individual steps of the test process in the display
area under the graph.
You can cancel a running test at any time by clicking the Stop button.
 You can now see the result of the test in the graph and the relevant displays and save
it.
See also
 Saving Test Data → 47
4.2 Running a Standard Test Series
The following requirement must be fulfilled:
► The Benchmark tab is selected in the main screen.
To start more than one test in succession, proceed as follows:
1. If there are several optical drives available, select the one you want in the drop-down
menu.
2. If you want to change the standard tests:
1. Click the
button.
 The Nero DiscSpeed - Options window is opened.
2. Click the Standard Tests navigation entry.
 The Standard Tests screen is displayed.
3. Select the check boxes for the tests that you want to run and clear the check boxes for
all tests that you do not want to start.
4. Configure further settings for the enabled tests as desired (under the relevant navigation
entries) and click the OK button.