4

Nero BackItUp ImageTool

5. Make additional settings as desired.

6. Click the Next button.

 The Finalize screen is displayed.

7. Verify the settings in this screen.

8. Click the Backup button.

 The Backup Process screen is displayed and the backup process starts. You can track

the process with the progress bar.

 The Waiting for Disc window is opened, and the selected drive is ejected.

9. Insert a suitable recordable disc.

 The Waiting for Disc window is closed and the backup process continues. (Nero BackI-

tUp ImageTool starts a multisession disc automatically or continues with it.)

 If the disc's storage capacity is exhausted, the Waiting for Disc window is opened again

and the disc is ejected.

10. Remove the recorded disc and insert a new blank disc.

 The backup process resumes and the newly inserted blank disc is burned.

11. Repeat the previous step until the backup has been completely burned to disc.

 Once the backup is complete, the disc is ejected and the Backup Process window is

opened.

After the backup has been written completely, Nero BackItUp ImageTool will want to ver-

ify the data by default. For this purpose, it will require the discs in the sequence that they

were written.

If the backup was written to one single disc, the verification process is started

automatically.

12. Remove the disc.

13. Click on the Disc drives button in the Backup Process window.

14. Insert the first disc of the backup in order to have it verified.

15. Double-click the drive containing the disc.

 The verification process is started and the first disc verified. The disc is then ejected and

the Backup Process window is opened again.

16. Repeat the two previous steps for each disc of the backup in chronological order.

 When the backup is completed, a window with an appropriate message is opened.

17. Click the OK button.

 You have written the drive backup to a disc. Now you can save the log or click the Next

button to start other actions.