4

Nero BackItUp ImageTool
4. Select the appropriate burner in the upper drop-down menu.
5. Select the type of the inserted disc (CD or DVD) in the Disc Type drop-down menu.
6. Click the Create button.
 The creation process begins; you can track the process via the progress bar and the
messages. After the creation process is completed, the disc is ejected and a window with
the message "Copy image process has finished successfully" opens.
7. Click the OK button.
 The dialog box closes.
8. Click the Close button.
 The Create Bootable Disc window closes.
 You have created a bootable disc that can be used to start Nero BackItUp ImageTool.
See also:
 Remote FTP 82
12.2 Starting Nero BackItUp ImageTool
Nero BackItUp ImageTool is started from the bootable CD/DVD that you created with Nero
BackItUp. If booting from the CD/DVD, the computer is started without having to access the
hard drive. Since the hard drive is disabled, backup or restore without verification errors is
possible.
The following prerequisites must be fulfilled for the computer to be able to boot from the disc:
 The start sequence must be set in the BIOS of the computer in such a way that the drive
is addressed first as the boot drive (start sequence CD-ROM, C, A for instance).
 In the case of an SCSI CD-ROM drive, this drive must be connected to an SCSI adapter
with a separate BIOS in which settings can be modified accordingly. (This will only work if
there are no IDE hard drives present, as these come before the SCSI adapter in the boot
sequence.)
 The bootable CD/DVD that you created with Nero BackItUp is placed in the drive.
Nero BackItUp 63
1.
To boot the compute
r from the disc and to start Nero BackItUp ImageTool, proceed as fol-
lows:
Start the computer.
 The computer starts and boots from the CD/DVD.
Nero BackItUp ImageTool is loaded. You can track the process with the messages on
the screen.
The Nero BackItUp ImageTool start screen is displayed. A language selection list is dis-
played.