4

Specifying The Backup Target And Starting The Backup Process

8. During the backup process, configure other setting options in the extended area as desired.

 If the disc's storage capacity runs out, the Waiting for Disc window opens and the drive

is ejected.

9. Remove the recorded disc and insert a new blank disc.

 The backup process resumes and the newly inserted blank disc is burned.

10. Repeat the previous step until the backup has been written completely.

 The Select source drive for data verification window opens and the drive is ejected.

If the backup was written to one single disc, the verification process is started

automatically.

11. Insert the first disc of the backup in order to have it verified.

12. In the Select source drive for data verification window, select the appropriate drive and

click the OK button.

13. The verification process is started and the first disc verified. After verification the disc is ejec-

ted and the Select source drive for data verification window appears again.

14. Repeat the two previous steps for each disc of the backup in chronological order.

 Once the backup process is complete, the disc is ejected and a message window opens.

"Backup process completed successfully"

15. Click the OK button.

 You have burned the backup. Now you can save the log or click the Next button in order

to start other actions, e.g. creating a new backup or closing the wizards.