4

Specifying The Backup Target And Starting The Backup Process
Nero BackItUp 29
More
Opens the extended area.
Back
Shows the previous screen, i.e. the Backup Settings screen.
Backup
Starts the backup process. Depending on the target that you se-
lected previously, the backup is written onto a disc, saved on a hard
drive, uploaded onto a server, or created as an image.
Cancel
Cancels the procedure.
The following setting options are available in the extended area:
Check box
Verify data after
backup
Verifies that the data is complete and correct after backup
Check box
Use shadow copy
Uses a shadow copy for the backup. The shadow copy feature is
used to back up files that are open at the time and that you are still
working on.
This feature is available in the Backup Wizard window.
Selection field
Write speed
Selects the speed at which the disc is written.
Button
Save
Saves information on the backup such as selection and settings.
Button
Create Job
Creates a job from the backup. This means that this backup will be
carried out regularly at a defined time. The Job Information
screen, in which you can indicate the cycle for the job, among other
things, is shown.
6.3 Backup Process Screen
The Backup Process screen is displayed during the backup process. It consists of a main
screen and an extended area. You can track the backup process with the progress bar and
the messages in the main screen. You can open the extended area with the More button
and configure further actions.