User manual

Nero BackItUp ImageTool
Æ If you have selected a complete hard drive (e.g. Disc 1) as the target location, the
Restored partition size area will be available.
8. In the Restored partition size
source size.
area, specify whether the restore will be fitted to the target or
Nero BackItUp 66
Prerequisite: The occupied
Fit ion will remain intact, and the partition to be
ource
rdingly.
storage space of the source partition (restore) must be smaller
Fit applied, the target partition will
be e
spa ou can repartition later if necessary.
Prerequisite: The source partition must be smaller than the target partition and the
ce of the source partition (restore) must be smaller than or equal in
size to the target partition.
9. If the the
oper ecord
box.
1 , check the appropriate box.
Restore button.
an track
the process via the progress bar and the messages.
ith an appropriate message will
13. Click the OK button.
Î You have restored a drive backup.
Now you can save the log or click the Next button and start other actions such as
executing the same restore again, creating a new restore, or closing the wizard.
12.8 Exiting Nero BackItUp ImageTool
After you have carried out the required actions, you can exit Nero BackItUp ImageTool. To
do this, proceed as follows:
1. Remove the bootable CD/DVD from the drive.
to target size: The size of the target partit
restored will be adapted accordingly. If the target partition is larger than the s
partition, the partition limit will be extended; otherwise it will be reduced acco
than or equal in size to the target partition.
to source size: The size of the source partition will be
adapted accordingly. Partition space that is not required will become unused storag
ce that y
occupied storage spa
hard drive or partition to be restored contains an operating system and if you want
ating system to start when the computer starts, check the Restore master boot r
10. Click the Next button.
Æ The Restore Wizard Completed screen appears.
The previously set options are displayed.
1. If you want to Verify the data after the restore
12. Click the
Æ The Restore Process screen appears and the restore process is started. You c
When the restore is concluded, a dialog window w
appear.
If the drive is locked, click the Open button followed by CD/DVD to eject all drives.
2. Click the File menu followed by Shutdown System.
Î Nero BackItUp ImageTool is exited and the computer shut down.