User manual
Table Of Contents
- Nero BackItUp Manual
- 1 Start Successfully
- 2 Launching the Program
- 3 User Interface
- 4 Back up Files
- 5 Backing up Files Again - Updating a File Backup
- 6 Backing up Drives
- 7 Specifying the Backup Target for File and Drive Backup and Starting the Backup
- 8 Scheduling Backups - Nero BackItUp Jobs
- 9 Verifying Backups
- 10 Restoring Files and Drives
- 11 Backup and Restore Tools
- 12 Nero BackItUp ImageTool
- 13 Other Operations
- 14 Options Window
- 15 Technical Information
- 16 Index
- 17 Appendix: Nero BackItUp File Extensions
- 18 Contact
Nero BackItUp ImageTool
10. Click the OK button.
Æ The backup process resumes. When the backup process is completed, a dialog box w
an appropriate message will open.
Click the OK button.
Æ The dialog box is closed.
ith
11.
n image of the drive backup with Nero Image Recorder. You can
ero Express.
s, or you can
12.6 Verify
ting drive backup. Nero BackItUp
re successfully. The data
against the source data. If you perform the
data has changed in the meantime, you can
To
2.
lick the
Î You have created a
burn this image to an appropriate disc using Nero Burning ROM or N
Now you can save the log or click the Next button and start other action
close the wizard.
ing a drive backup
Nero BackItUp ImageTool can be used to verify an exis
ImageTool verifies whether the backup can be used to resto
integrity is checked. The backup is also checked
verification immediately after the backup and no
use the function for data verification.
verify a backup, proceed as follows:
1. Click the Verify button.
Æ The Verify Wizard window opens and the welcome screen appears.
Click the Next button.
Æ The Verify Settings screen appears.
3. C button.
Æ The File window opens (see File/Folder window).
4.
Æ backup is transferred and the name of the backup
5.
Select a drive backup and click the OK button.
The File window closes. The selected
is shown in the Select Backup display panel.
If you want to compare the CRC checksum of the backed up drive with the CRC checksum
of the original drive, select the Verify by CRC option button.
6. If you want to compare the original drive with the backup sector-by-sector, select the Sector
by Sector option button.
usually supplies more
Calculation of the CRC checksum takes longer than the sector comparison, however it
precise results.
7.
8. Click the Verify button.
appears. You can track the progress of the verification via
Select the appropriate hard drive or partition from the lower area.
Æ The Verify Process screen
the progress bar and the messages.
After successful verification a dialog box opens, showing the result of the verification.
Nero BackItUp 64