User manual

Nero BackItUp ImageTool
Æ The verification process is started and the first disc verified. The disc is then ejected and
again (see File/Folder window
the Folder window opens
).
14. Repeat the two p
Æ W
15. Click the OK button.
Æ The dialog box is closed.
12.5.3 d
fter you have selected a drive to back up (see Selecting a drive
revious steps for each disc of the backup in chronological order.
hen the backup is completed, a dialog box with an appropriate message appears.
Î You have burned the drive backup to disc or hard drive with Nero BackItUp ImageTool.
Now you can save the log, click the Next button and start other actions or close the
wizard.
Uploa ing a backup to an FTP server
A ) you can start the drive
ettings and Completing
backup and upload to an FTP server. This is done in the Backup S
the Backup Wizard screens.
if you have entered an FTP server in the options (see FTP
Nero BackItUp 62
This feature is only available
tab).
d the drive backup to an FTP server, proceed as follows:
2. er if necessary.
To uploa
1. Select the desired FTP server in the Target drop-down menu.
Select a fold
You can also create a new folder or rename or delete an existing folder.
3. s needed (see the comparable Backup Settings screenConfigure other settings a in Nero
4.
Æ The Completing the Backup Wizard screen appears.
ackup Wizard screen
BackItUp).
Click the Next button.
5. Configure the options as desired (see the comparable Completing the B
6. ackup button.
ck
in Nero BackItUp).
Click the B
Æ The Backup Process screen appears and the backup process is started. You can tra
the process using the progress bar and the messages.
re available during the backup process:
Automatically shut down the PC when done: Shuts down the PC once the backup is
Æ W
The following setting options a
complete.
hen the backup is completed, a dialog box with an appropriate message appears.