User manual

Nero BackItUp ImageTool
Æ e
After the creation process is completed, the disc is ejected and a dialog box with the
age process has finished successfully" is opened.
6. Click the
sed.
7. Cl
Î The Create Bootable Disc dialog box is closed.
12.2 Laun
ro
If booting from the CD/DVD, the computer is started without having to access the
fro


r
there are no IDE hard drives present, as these come before the SCSI adapter in the boot
The creation process is started; you can track the process via the progress bar and th
messages.
message "Copy im
OK button.
Æ The dialog box is clo
ick the Close button.
You have created a bootable disc.
ching Nero BackItUp ImageTool
Nero BackItUp ImageTool is launched from the bootable CD/DVD that you created with Ne
BackItUp.
hard drive. Since the hard drive is disabled, backup or restore without verification errors is
possible.
The following prerequisites must be satisfied in order for the computer to be able to boot
m the disc:
The start sequence must be set in the BIOS of the computer in such a way that the drive
is addressed first as the boot drive (start sequence CD-ROM, C, A for instance).
In the case o
f an SCSI CD-ROM drive, this drive must be connected to an SCSI adapte
with a separate BIOS in which settings can be modified accordingly. (This will only work if
sequence.)

The bootable CD/DVD that you created with Nero BackItUp is placed in the drive.
Nero BackItUp 56
r is switched off, first start
from the CD/DVD if this is the case.
ackItUp ImageTool, proceed as
follo
1. Sta
Æ
2. Select the lan m the Please choose your language
3. e terms of the license
ment.’ Nero BackItUp
ageTool cannot be used without accepting the terms.
Because it is
the comp
not possible to insert a CD/DVD when the compute
uter as usual, insert the CD/DVD, and then shut down the computer.
It is important that the CD/DVD is already present in the drive when the computer starts;
the computer will only boot
To boot the computer from the disc and to start Nero B
ws:
rt the computer.
The computer starts and boots from the CD/DVD.
Nero BackItUp ImageTool is loaded. You can follow the process in the messages at the
bottom margin of the screen.
The Nero BackItUp ImageTool start screen is displayed.
guage for Nero BackItUp ImageTool fro
selection list. Click the OK button.
Æ The Nero BackItUp ImageTool main screen opens.
The dialog box with a license agreement opens.
Car fully read through the license agreement. If you agree to the
agreement, click ‘I accept all terms of the preceding License Agree
Im