User manual

Backup and Restore Tools
11.1.3 Selecting and combining filters
You can select and combine filters created in Nero BackItUp.
Filters of the same filter type (e.g. the file extension filter type) are linked with an OR
relationship. This means that files to which one or both conditions apply will be filtered.
Filters of different types are linked with an AND relationship. This means that files to which
both conditions apply will be filtered.
To select and combine filters, proceed as follows:
1. If you want to combine filters in general and save them as a profile:
1. Click the File menu followed by Options.
Æ The Options window opens.
2. Click the Backup tab.
3. Click the Add/Remove button.
2. If you want to combine filters for a particular backup, click the Add button in the File
Backup screen or in the extended area in the Backup Wizard window.
3. If you want to combine filters for a particular restore, click the Add button in the Restore
screen or in the extended area in the Restore Wizard window.
Æ The Select File Filters window opens.
Fig. 23: Select File Filters window
4. If you want to select filters:
1. Select the desired filter in the Known filters selection list.
2. Click the >> button.
Æ The filter is added to the Selected filters list.
5. If you do not want to apply a filter:
Selected filters list.
1. Select the filter in the
2. Click the << button.
Æ The filter is removed from the Selected filters list.
Nero BackItUp 52