User manual

Restoring Files and Drives
Fo n one restore procedure.
6. M available:
to a disc, insert the disc in a drive.
, ensure
7.
Æ re Wizard window with the Drive Restore Settings screen opens.
8. In
1. If you have selected an entire hard drive (with partitions) to restore, select a hard drive as
selected a partition to restore, select a partition as the target location (e.g.
red partition size area will be available.
9. the target or
r technical reasons, only one partition can be restored i
ake the backup
1. If the backup has been burned
2. If the backup has been saved to hard drive, network drive, or removable medium
that your computer has access to the respective drive.
3. If the backup has been saved as an image file, load the image file, e.g. with Nero
ImageDrive.
Click the Start Restore button.
The Resto
the Select Target Location drop-down menu, select where the backup is to be restored:
the target location (e.g. Disc 1).
2. If you have
Data (D)).
Æ If you have selected a complete hard drive (e.g. Disc 1) as the target location, the
Resto
In the Restored partition size area, specify whether the restore will be fitted to
source size.
Nero BackItUp 47
is larger than the backed up
e size of the target partition is reduced to the size of the backed up
ge space no longer needed is no longer part of the partition. You
10. If the hard drive or partition to be restored contains an operating system and if you want the
operating system to start when the computer starts, check the Restore master boot record
mpleted screen appears.
re (see Starting a restore
If the target partition and backed up partition are the same size, the options provide the
same result. There are differences if the target partition
partition.
Fit to target size: The size of the target partition remains intact. The storage space not
needed for the restore becomes empty space but remains part of the partition.
Fit to source size: Th
partition. Partition stora
can repartition this unused storage space as needed.
box.
11. Click the Next button.
Î The Restore Wizard Co
You can now start the resto ).
10.4 Sta
ore, you can start the restore in the
2.
3. If y
res
rting a restore
If you have selected files or a drive to rest Restore
Wizard Completed screen.
To do this, proceed as follows:
1. Check the information.
If you want to change the specifications, click the Back button.
ou want Nero BackItUp to verify the files after the restore, select the Verify data after
tore check box in the extended area.