User manual

Specifying the Backup Target for File and Drive Backup and Starting the Backup
If you previously checked the Verify data after backup box in the Completing the
Backup Wizard screen and the backup has been burned to multiple discs, then the
Select source drive for data verification dialog box will open and the drive will open.
12. drive for data verification dialog box, select the appropriate drive and
Æ
ar again.
13.
Æ ckup process has been concluded, the disc will be ejected and a dialog box
will appear.
11. Insert the first disc of the backup to have it verified.
In the Select source
click the OK button.
Verification will start and the first disc will be verified. After verification the disc will be
ejected and the Select source drive for data verification dialog box will appe
Repeat the two previous steps for each disc of the backup in chronological order.
When the ba
Fig. 10: "Backup process completed successfully" dialog box
14.
T
Î r a
Now you can save the log or click the Next button and start other actions such as
executing the same backup again, creating a new backup, or closing the wizard.
7.2 Uploa
Click the OK button.
Æ he dialog box closes.
You have burned the backup to a disc or saved it to a hard drive, a network drive, o
removable medium.
ding the backup to an FTP server
Nero BackItUp can be used to upload and save the backup to an FTP server.
re is only available if you have entered an FTP server in the options (see FTP
This featu
tab
).
r, proceed asTo start the backup and upload it to an FTP serve follows:
1. Select the desired FTP server in the Target drop-down menu.
2. older on the server:
1. Click the
If you want to specify a f
button.
2. Click the New Folder button and enter a name.
me selection list.
3. Double-click a folder in the Folder Name selection list.
Æ The Open Folder window opens.
Æ A new folder is created and displayed in the Folder Na
Nero BackItUp 25