User Manual
6
Before every ride, it is important to carry out the following
safety checks. Do not ride a baery-powered ride-on toy that is not
in proper working condion! Replace any worn or broken parts as
needed.
The steering wheel or handlebars are ghtened and secured in
the mount or dashboard.
The steering wheel or handlebars are posioned so that the
rider can easily operate and steer the ride-on. There must be
no diculty for the rider in turning and/or operang the
powered foot pedal or hand operated push buon.
The steering wheel or handlebars are aligned so that the
steering column and front wheels are oriented in the
same direcon.
The wheels are securely aached to the baery-powered
ride-on and they are in good condion. It is acceptable to
have slight lateral movement in each wheel.
The wheels have no holes or are worn down in any one
area and that the tracon strips are intact and secured to
the wheels.
The drive wheel is securely fastened to the gear box, which
houses the motor.
For all electrical components, make sure:
• The baery is fully charged.
• The charging cord is NOT aached to the ride-on in
any way.
• All connectors are securely snapped in place and will not
come detached while riding.
• No wiring is exposed, worn, or detached in any way; the
motor is not hot to touch.
• All electrical buons, including the power buon,
accelerator foot pedal or hand operated buon, and any
buons for lights and sounds, work properly.
• If the ride-on’s electrical components show any sign of
damage or missing parts DO NOT RIDE unl the condion
is corrected.
• Clean, dry, and in good condion.
• All plasc pieces, including fenders, seat, footrests,
steering wheel or handlebars, wheels, bumpers, and/or
hub caps are securely aached.
• There are no cracks or structural problems on the
ride-on toy.
• If the ride-on toy shows any sign of damage or missing
parts DO NOT RIDE IT unl the condion is corrected.