User Guide

SETUP: CHARGING & PAIRING
CHARGING
BLUETOOTH PAIRING
(red) = Charging
(off) = Charging Complete
1. Insert the USB charging cable’s
Micro USB plug into the charging
port on your headset.
2. Insert the USB charging cable’s standard
USB plug into the USB port of a computer or
suitable USB charging adapter.
3. The LED lndicator Light turns red while the
headset is charging then turns off once charging
is complete. Charge fully before first using.
1. Press and hold the power button
for approximately 3-4 seconds to power
on your headset.
2. Go to the Bluetooth settings menu on your
phone/computer. Make sure that Bluetooth
is turned on. Connect to the device name that
corresponds to your headset.
3. The LED indicator light turn blue and flash
when paired to your phone/computer.
3-4 SEC
PRESS & HOLD
PAIRED
Blue Flashing LED
254mm
152.4mm
GAM83056B