Installation Instructions
Table Of Contents
- R900 cellular endpoint Wall and Pit Installation and Maintenance Guide
- Contents
- Figures
- Tables
- Chapter 1: Product Description
- Chapter 2: Specifications
- Chapter 3: General Installation Guidelines
- Chapter 4: Wall Installation
- Chapter 5: Pit Installation
- Chapter 6: Maintenance and Troubleshooting
- Appendix A: Endpoint Modes
- Appendix B: Field Manager
- Glossary
12
R900 cellular endpoint Wall and Pit MIU Installation and Maintenance Guide
10.
Snap the cover onto the encoder register.
Figure 9 – Covering the Terminal Screws
11.
Run the cable to the R900 cellular endpoint and fasten it securely.
Do not exceed maximum cable lengths as defined in "Encoder Register Interface" on
page 3. If the encoder register is prewired and potted, use Schotchloks for connecting the
register to the R900 cellular endpoint.