User's Manual

Product Description
Figure 1 R900G Endpoint
R900G Programming
The R9OOG is field-programmable via an Infra Red (IR) port. At the factory, each of
the following items is progranuned into the Mill:
Serial number -Each R900 module is given a unique serial number/identifica-
tion number. To eliminate the possibility for duplicate ID numbem, custom
serial numbem are not available.
Time between metrology reads -The R900 module reads the
metrology every 14 seconds.
meter
.Time between R900 module transmissions -The time between R900 module
transmissions is set for approximately 14 seconds. Custom time intervals are
not available
Field progammable features are the following:
Existing index reading
Pressure compensation
Test hand registration
RF Protocol Error Detection
The Radio Frequency (RF) protocol is comprised of a header, data packet, and an
error detection mechanism that reduces the possibility of erroneous data.
2
R900G Endpoint Installation and Maintenance Guide