User Manual

4
cellnetmiu Rev. 0
12/3/98 4:32 PM
SECTION 2
INSTALLATION
This section describes storage and unpacking instructions, preliminary tests, tools and
materials, site selection, and installation.
STORAGE
Inspect shipping containers for damage upon receipt and inspect contents of any damaged
cartons prior to storage. Store the cartons in a clean, dry environment. The temperature
should remain between -22¡ and 149¡F (-30¡ and 65¡C). Keep in mind that the Wall
MIU1
has an internal battery. Storage for more than one year, of the Wall MIU1, may affect
product life. Be sure to use a first-in first-out inventory control system.
UNPACKING
As with all precision electronic instruments, the Wall MIU1 should be handled with care;
however, special handling is unnecessary. After unpacking the MIU, inspect it for damage. If
the MIU appears to be damaged, or proves to be defective upon installation, notify your
Schlumberger Sales Representative. If the MIU requires reshipment, use the original cardboard
box and packing material.
PRELIMINARY TESTS
The Wall MIU1 does not require any tests or programming prior to installation.
TOOLS AND MATERIALS
Tables 2.1 and 2.2 show the recommended tools and materials you may need to successfully
install the Wall
MIU1 or to replace the MIUÕs internal Battery. Note that some items may
not apply to your specific installation or the list may not contain all required tools or
materials.
Table 2.1 Recommended Tools
Item Description/
Recommendation Use
Tool kit contains standard tools
including:
¥ Assorted screwdrivers
¥ Needle-nose pliers
¥ Wire stripper
Diagonal cutters
¥ ElectricianÕs knife
Hammer
Various installation procedures
Magnet 6 lb. force activating the MIU
Table 2.2 Recommended Materials