User Manual

16
cellnetmiu Rev. 0
12/3/98 4:32 PM
8 Repeat Steps 5 through 7 for each pair of
wires.
9 Tuck the Scotchloks into the splice enclosure
and route the cables through the cutouts at the
ends of the splice enclosure (Figure 2.16).
10 Coat the inside of the splice enclosure with
Dow Corning #4
¨ or GE Novaguard GB24 ¨
moisture protection compound (Figure 2.17).
11 Close the splice enclosure, pressing it firmly
until the teeth lock together
(Figure 2.18).