User Guide

Review
Reviews any readings stored.
l Press ITEM to display the last reading captured.
l Press ITEM again to see the next reading.
l If the unit contains no readings, REVIEW remains on the screen.
OR
l Press MENU to go to the next menu option.
Reading Error
A Reading Error is usually caused by one of these situations:
l End probe not aligned with remote pad.
l No encoder is connected to remote pad.
l Encoder is not connected properly to remote pad.
l Connecting wire is cut or broken.
Other Errors
This section provides information on two other error messages.
l SHORT – Displayed as H; indicates the odometer contains a short circuit. N:I2HH55.
l OPEN – Displayed as a – (dash); indicates odmeter contains an open circuit.
N: I2- - 55.
1600 Alabama Highway 229, Tallassee, AL 36078
Tel: [phone] • Fax: [phone]
© Copyright 2020, Neptune Technology Group Inc.
neptunetg.com
Neptune
®
Advantage II Users' Guide
5
Advantage II