User's Manual

Appendix B: Keyboard
MRX920/MTX950 User’s Manual B-3
variety of other functions depending on the software. To select an
object, first move the pointer over the object you want to select,
and then press the left button one time. The functions of these
buttons are software specific.
Double-clicking
Double-clicking is a common technique for selecting objects or
launching programs from icons. Once you have moved the pointer
over the object you wish to select, rapidly press the left button
two times. This action is commonly referred to as “double-
clicking” an object.
Dragging
Move the pointer to the desired location then press down the left
button. While still holding down the left button, move the pointer
to the desired location. Release the button.
Move the pointer to the desired location. Tap the touchpad twice
quickly as if you were double-clicking, however do not remove
your finger after the second tap. Move the cursor to the desired
location. Lift your finger to finish dragging.
Adjust the touchpad settings by selecting Settings/Control Panel/
Mouse/Buttons. These settings allow you to change the
orientation of the touchpad from right-handed to left-handed, and
fine-tune the pointer movement and timing of clicks.
Touchpad Precautions
If not properly cared for the touchpad can be easily damaged.
Please take note of the following precautions.
Do not rest heavy objects on the touchpad or the touchpad buttons.