User's Manual

Using the MRX920 Unit
MRX920/MTX950 User’s Manual 4-23
Removing the USB Flash Drive
Follow this procedure to safely remove the USB flash drive from
the laptop while it is operating.
1 Click the USB flash drive icon located in the lower right
corner of the Windows task bar.
The USB flash drive properties dialog appears.
2 Select the Socket Status tab.
3 Select the USB flash drive from the list provided.
As shown in Figure 2.3 on Page 2-4, the list provided shows
one socket as being empty. (Refer to “USB Port,” on page 2-4.)
4 Click OK.
A dialog displays telling you that you can now remove the
USB flash drive.
5 Remove the USB flash drive from the port on the back of the
laptop.
Improperly removing the USB flash drive while the laptop is ON can cause
data corruption on the USB flash drive.