User's Manual

Using the MRX920 Unit
4-22 MRX920/MTX950 User’s Manual
From the Route Selection Screen
1 Press the Exit Route Reading button.
The Route Export screen displays.
2 On the Route Export screen, press the Exit Route Reading
button again.
The Welcome screen displays.
3 Press the Exit Program button.
The software closes.
It is now safe to turn off your computer. Proceed to
"Turning off the Laptop".
Turning off the Laptop
1 From the Start menu, click Shut Down.
2 From the Shut Down Windows screen select Shut Down.
3 Click OK.
4 You can now safely remove the USB flash drive. (Refer to
“Removing the USB Flash Drive,” on page 4-23.)
5 Remove the power cable from the vehicle power supply
receptacle.
6 Drive back to your utility to return the USB flash drive
containing the read data so it can be uploaded to the host
software.
Improperly removing the USB flash drive while the laptop is ON can cause data
corruption on the USB flash drive. Refer to the following section for procedures to
safely remove the USB flash drive while the PC is on.