User's Manual

Using the MRX920 Unit
MRX920/MTX950 User’s Manual 4-21
Creating an Export File
After you have completed reading all of your routes, you need to
create an export file for your utility to upload the read data to the
host software.
When all routes have been read, use the following procedure to
create an export file:
1 Press the Route Export tab to display the Route Export
screen.
2 Press the Export Routes button to store the routes
on the USB flash drive.
Exiting the Software
There are three screens, Route Import, Route Selection, and
Route Export, that display the Exit Route Reading button. On the
Route Import and Route Export screens, when you press this
button you return to the Welcome screen. When you press this
button from the Route Selection screen, the Route Export screen
displays. Complete the following procedure to exit the software,
then proceed to the procedure to turn off the laptop.
From the Route Import and Route Export Screens
1 Press the Exit Route Reading button.
The Welcome screen displays.
2 Press the Exit Program button.
the software closes.
It is now safe to turn off your computer. Proceed to
"Turning off the Laptop".