User's Manual

Using the MRX920 Unit
4-16 MRX920/MTX950 User’s Manual
All missed accounts are listed in the information area of the
screen.
Refer to the following section, "Viewing Account Details" for
specific details of a missed account.
Viewing Account Details
Before reading begins, the Route Selection screen displays zeros
for all routes in the # of read MIUs field. Once reading is
initiated, the captured reads for each route are recorded in this
field.
After meter reading is completed, only the missed or unread
accounts remain on the Missed Reads screen. The meter reader
then knows which addresses to reread.
If for any reason the MRX920 is not able to read missed MIUs on
the second attempt, the meter reader can select specific accounts
by using the MIU Details dialog to display more information for
the account.
Using Coded Notes or Skip Codes
You can use the MIU Details screen to record trouble that you are
having with the reading. Or if you choose to skip the reading, you
can record the reason. However, you cannot have an automatic
reading with a skip code. The skip codes means that you are
skipping the reading.
Entering a Trouble Code
To enter a trouble code, complete the following steps.
1On the MIU Details screen, tab to the Coded Notes field.
2 Choose one of the following options:
When viewing details for an account, only two of the three notes fields can display.
There is always the reading code, and either a trouble code or a skip code.