User's Manual

Using the MRX920 Unit
MRX920/MTX950 User’s Manual 4-3
Beeper Settings
A beeper is available in the MRX920 unit to emit a beep tone for
every account that is read and stored in the MTX950 software.
This helps to monitor the meter reading without having to look at
the laptop display. This also offers a safe way to monitor reading
progress while driving a route.
The beeper only sounds while the MRX920 is performing readings
and stops when all readings are completed. You can turn the
beeper function on or off while the unit is performing readings.
The default setting in the MRX920 is for the beep tone to be turned
off.
Turning the Beeper On or Off
Follow this procedure to switch the MRX920 beeper on or off.
1 Access the Route Selection screen.
At the top of the screen, there is a Use Beeper field with a
check box, as shown in Figure 4.2.
Beeps are only heard when readings are posted for MIUs in the selected route.