User's Manual

MRX920/MTX950 User’s Manual 3-1
Chapter 3 Setting Up the MRX920 Unit
This section provides basic instructions for setting up the MRX920
unit so it can be used to perform mobile meter reading and
exchange information with the host computer.
Placing the MRX920 Unit in the Vehicle
Follow this procedure to set up the MRX920 unit in the vehicle
passenger seat.
1 Place the MRX920 unit in the passenger seat with the two
seatbelt retention loops facing the back of the seat.
2 Press the blue button on the safety pin, and pull the pin out of
the seatbelt retention loop. (See Figure 3.1 on Page 3-2.)
Neptune recommends that you insert the USB flash drive into the laptop after you place
the unit in the vehicle.
Never set up the MRX920 unit during a lightning storm or under excessively wet condi-
tions.