User Manual

Troubleshooting
4-4 MRX920 User’s Manual
My Bluetooth connection isn't
working.
My MX900/RF Test software is
connected to the wrong MRX920
Check the MAC address (available
under Connection Settings) and
compare it to the MAC address on the
MRX920's label.
Connected through the other method
Check Receiver Settings to ensure
you are connecting as you intended
(Bluetooth vs. USB)
Look at front of MRX920. LEDs labeled
Bluetooth and USB flashes slowly
when not connected, and flashes
quickly on the chosen connection
method (Bluetooth or USB) within the
first few seconds of being connected.
Flash continues extremely fast.
Cannot press the in the top
right corner
Must be in the Stop mode to be able to
press the .
Verify that the software is in the Stop
mode.
Table 4.2 Host Software Troubleshooting Table
Problem Probable Cause Things to Check