User Manual
Table Of Contents
- 16-0202 - Exhibit Cover.pdf
- MRX920v3 User Manual.pdf
- MRX920™ User’s Manual
- Chapter 1 Introduction
- Chapter 2 Specifications
- Chapter 3 Getting Started
- Chapter 4 Troubleshooting
- Glossary
- Index
Getting Started
MRX920 User’s Manual 3-15
5 Insert the appropriate end of the vehicle power supply power cable
into the connector on the MRX920, as illustrated in
Figure 3.16.
Figure 3.16 Vehicle Power Supply Power Cable
6 Plug the other end of the power cable into the vehicle power
supply receptacle as illustrated in
Figure 3.17.
Figure 3.17 Vehicle Power Supply Cable Inserted In Car
Installing the Antenna
The proper installation of the antenna cable is critical for the optimal
performance of the MRX920. If the cable is crimped, the performance
of the unit degrades significantly.
There are several options for running the cable. Whichever method
works best for you depends on the type of vehicle being used. The most
important consideration when installing the antenna is for the cable to
remain undamaged.
Vehicle power
supply cable
Vehicle
power
supply