User Manual

Getting Started
MRX920 User’s Manual 3-3
Bluetooth/USB Support
The MX900 software supports Bluetooth and USB connection to the
current receiver as well as a serial port connection for the legacy model
receiver.
Bluetooth Support
The latest generation MRX920 supports Bluetooth connectivity from
the MRX920 unit to the laptop. Only one MRX920 at a time can be
bonded to the MX900 host software/PC.
USB Connection
The MX900 software supports a virtual serial port over USB.
Neptune’s driver maps the USB device on the MRX920 to a virtual
communications port. The MRX920 must be plugged into PC via USB
cord in order to install USB driver.
The Laptop
One of the available options when purchasing the MRX920 is to
purchase the receiver by itself. This allows you to utilize an existing
laptop hardware already installed in the utility vehicle. This section
guides you through setting up the MRX920 with a third-party laptop.
The laptop needs a car charger or power inverter in order to be charged
in the vehicle while reading.
During the installation, prompts provide a warning indicating that the driver is not
Windows certified.
Neptune is not responsible for issues with any laptops not provided by Neptune and
does not warranty, support, or repair laptops not provided by Neptune.