User Manual
Table Of Contents
- 72126503 - Exhibit Cover
- For FCC_IM_L900 Pit_09262017
- L900™ MIU Pit Installation and Maintenance Guide
- Copyright
- Chapter 1: Product Description
- Chapter 2: L900 Specifications
- Chapter 3: General Installation Guidelines
- Chapter 4: Pit Installation
- Chapter 5: Data Logging Extraction
- Chapter 6: Maintenance and Troubleshooting
- Chapter 7: Contact Information
- Glossary
- Index
- Neptune Locations
Figure 16 – Installation Completed
Figure 16 shows a completed installation of the antenna.
Begin the Installation
Complete the following steps to install the L900 MIU in a pit.
Figure 17 – Black Thread Guard from
Male F-Connector
1. Remove black plastic thread protector cap from the
male F-connector on the L900 MIU.
Figure 18 – Seating Washer
2. Place the flat black rubber washer around the male F-
connector on the L900 MIU as shown in Figure 18.
L900 MIU Pit Installation and Maintenance Guide 17
Chapter 4: Pit Installation