Maintenance Guide
Table Of Contents
6. Check to ensure the wires are still fully seated before crimping the connector. The
following image illustrates improper connections due to wires not being fully seated.
Figure 39 – Improper Connections
7. Squeeze the connector firmly with the proper crimping tool until you hear a pop and gel
leaks out the end of the connector.
8. Repeat steps two through six for each color wire.
9. After connecting all three color wires, read the encoder register to ensure proper
connections, and the CMIU is functioning properly.
Figure 40 – Three Colored Wires Properly Connected
Cellular MIU (CMIU™) Pit and Wall Installation and Maintenance Guide 31
Chapter 5: Pit Installation