Maintenance Guide

Installing the Scotchlok™ Connectors
Complete the following steps to install the Scotchlok™ connectors.
Make sure you complete the steps outlined in "Pit CMIU™ Installation" on page25 to install
the CMIU through the lid before you install the Schotchloks.
1. Use the 3MScotchlok-type connector to connect the CMIU wires to the encoder wires.
2. Hold the Scotchloks connector between the index finger and thumb with the red cap
facing down.
Figure 35 – Scotchlok™ Connector
Figure 36 – CMIU™ Color Code for Wires
Cellular MIU (CMIU™) Pit and Wall Installation and Maintenance Guide 29
Chapter 5: Pit Installation