Maintenance Guide
Table Of Contents
2. Pair the wires according to the color diagram.
Figure 14 – CMIU™ Color Code for Wires
3. Slide the paired wires into the grooves provided until they seat into the back of the gel
cap.
4. Squeeze the gel cap firmly using the appropriate crimping tool to ensure a good
connection.
5. Repeat this process until all connections are complete.
6. Store excess wire and Scotchloks in the hollow cavity in the back of the CMIU using the
strain relief guides.
Figure 15 – Cable in Back of Mounting Adapter
Cellular MIU (CMIU™) Pit and Wall Installation and Maintenance Guide 17
Chapter 4: Wall Installation